Help with layout

[Rpy1971]

Ok so I purchased a 95 chris craft concept 18 in February as a project ( ad said water ready) lol anyway 2 new exhaust manifolds a new intake and complete new floor later and I have no clue how the kick panels which were in place when I started go back in position. Smh 2 on the port side 3 on starboard. Anyone got a Pic or give me a clue?

 

[Horigan]

It would be helpful if you could post a picture of what you mean by "kick panels", but that's not currently possible on this site right now. If you're referring to the interior side panels, on my '95 Concept 21, they have threaded studs along the top that mount into holes along the upper fiberglass frame. Tighten those with nuts/washers on the backside. At the two lower corners, there are long screws that attach to the fiberglass frame.

 

[Rpy1971]

No, these are actually under the console and fit in from the top of the deck angled toward the bow somehow with an extra one for the driver which serves to change the angle of the area where your feet would rest , for comfort I assume. I've found some pics online but none at angles or with enough clarity zooming in that I can make out proper placement. One thing is certain if I tackle another project like this I will photo document beginning to end. I started taking picks about a week into this one but these were the first parts removed and I didn't expect the repairs to be so extensive.