Help Me Find a Replacement Engine Hood (2001 150 HP Ocean Pro)

Status
Not open for further replies.

blackened21

Cadet
Thread starter
Joined
Mar 29, 2017
Messages
13
Hello, I need help finding a replacement for my 2001 150 HP Ocean Pro Engine Hood. Mine is cracked cosmetically, and I can't seem to figure out what will fit for a replacement hood. I've heard FICHT hoods should fit it, but looking at the photos online, they aren't all designed the same.
Anyone want to help me figure this out? Thanks in advance. -Jon

IMG_0309.JPG IMG_0314.JPG
IMG_0301.JPG IMG_0302.JPG IMG_0304.JPG IMG_0303.JPG IMG_0296.JPG IMG_0299.JPG
 

mav6759

Chief Petty Officer
Joined
Jun 25, 2007
Messages
494
I had the problem with a cowling that I had...I fixed it myself...it was way cheaper then buying one....All I did was pick up wet&dry sand paper from the autozone, and wet sanded all the area inside and out... (you want sand an area 4 to 5 inches wider then the hole all the way around).. I went to Walmart and got some fiberglass cloth and some epoxy with the hardner...I put 1 layer fiberglass on the top and 1 on the inside..I did that until I had 3 layers on both sides...Waited until it dryed and sanded it down to shape and smooth, repainted it, and it looks really good...just an idea...

Mav
 

ajgraz

Lieutenant Commander
Joined
Mar 1, 2010
Messages
1,858
Do you have the missing pieces?

If so, some glass on the inside and some marine tex on the outside could do you, if like me you are more into function than appearance.

Edit: guy above me was faster
 

blackened21

Cadet
Thread starter
Joined
Mar 29, 2017
Messages
13
No Title

Do you have the missing pieces?

If so, some glass on the inside and some marine tex on the outside could do you, if like me you are more into function than appearance.

Edit: guy above me was faster


1.jpg
 

Attachments

  • photo261705.jpg
    photo261705.jpg
    114.9 KB · Views: 0

crazy charlie

Vice Admiral
Joined
May 22, 2003
Messages
5,757
They really made the cowlings much crappier than one a couple of years older.Way too thin on the fiberglass around the vents.Mine is a few years older and I can remove the cover by lifting it up by the vents with no chance of breaking.
 

blackened21

Cadet
Thread starter
Joined
Mar 29, 2017
Messages
13
I've been calling various salvage yards, and most of them say you have to come down and look around... Driving 12 hours away to "look around" in their warehouses and salvage yards isn't exactly ideal. One guy told me that "the old ficht covers" should be a better replacement. So I looked on EBAY and found this guys listing: http://www.ebay.com/itm/132135940781...%3AMEBIDX%3AIT

Problem is, when I messaged them and ask if it would fit my engine, I got the following response, "No, this one won't fit. I checked and I'm sold out of the one that would. I'm sorry I can't help."

Will this actually fit my engine or not? I think it will by looking at the photographs... Does anyone else out there have an opinion or way to determine if it will fit? Any help is greatly appreciated! Thanks in advance. -Jon
 
Last edited by a moderator:

GA_Boater

Honorary Moderator Emeritus
Joined
May 24, 2011
Messages
49,038
Old thread. Read the Help Tip on top of the page.

Closed.
 
Status
Not open for further replies.
Top