Help in identifying a motor

petersbc

Seaman Apprentice
Thread starter
Joined
May 19, 2013
Messages
38
I got an Evinrude 70HP from a friend to use as a parts motor. I was told it was a 73 and it looked to be compatible with my 77. Looking at the motor tag it says its a 79 (70973R). Now here is the rub. The ignition pack is not a 79 style. It's slightly different physically than my 77 but it's still a "power pack three" style. All the listings I can find show a completely different pack style in 79. Is this some sort of franken-motor or was there a mid year change?

I'm trying to determine what if anything is usable on this motor. I got it primarily for the ignition components but now I'm looking at possibly taking the reeds as well. The attachment is the power pack and if you look just to the right you can see why it's a parts motor. :)
 

Attachments

  • 79 power pack.jpg
    79 power pack.jpg
    145.9 KB · Views: 0

seahorse5

Rear Admiral
Joined
Jan 24, 2002
Messages
4,698
Re: Help in identifying a motor

The green coils and the metal box power pack point to a '74 70hp engine. After that through '76, they used a better coil which was black and a white plastic box power pack. The green coils probably have cracks in them. Replacement powerpacks were plastic for all the years so your metal one is original.

For 1973, the engine was a 65hp model.
 
Joined
Jun 5, 2013
Messages
21
Re: Help in identifying a motor

this is interesting, the model number you have listed above seems to be manufactured in 1979, but what i noticed is the actual motor itself looks exactly like my 1972 johnson, and the ignition system is the exact same as well, seems like i could use this as a parts motor. im not exactly sure if its possible, but it seems like someone at some point in time has swapped the original motor with an earlier 70's evinrude motor.
 

petersbc

Seaman Apprentice
Thread starter
Joined
May 19, 2013
Messages
38
Re: Help in identifying a motor

Thanks guys this all points to the proper "generation" motor for my use. After all the testing I did last night (separate thread on here) it appears as though the ignition is good so I don't need to use these parts at the moment. Coils are cheap so these will probably sit on a shelf to use in testing if needed. The Stator and timer base should work for me so I'll be mining those out to see what condition there are in. From a resistance check every thing but #2 coil checks good. Can't do a cranking test for various reasons including the hole in the crankcase. :)
 
Top