fuel seperating filters

holtzoo

Cadet
Thread starter
Joined
Oct 17, 2011
Messages
6
I'm confused about which seperating filter is better 10 micron or 21 micron :confused:
 

Chris1956

Honorary Supreme Mariner
Joined
Mar 25, 2004
Messages
29,328
Re: fuel seperating filters

A 10 Micron filter will have greater resistance to fuel flow. I would recommend you make sure the filter can supply enough fuel for the motor to operate at WOT.
 

Faztbullet

Supreme Mariner
Joined
Mar 2, 2008
Messages
15,938
Re: fuel seperating filters

I use the OEM filter when possible or the aftermarket equal and the OEM is 25 micron...
 
Joined
Oct 28, 2010
Messages
923
Re: fuel seperating filters

Definately stick with the OEM, but understand that when you add a water seperator your are adding a restriction in the fuel line. It is important that you verify the restriction of the entire fuel system before but more importantly after installation. No more than 4" of mercury. This can be done by a shop statically or you could spend $ (but at the price you could pay for about 2/3 of a shop labor rate) and buy an electric fuel pump of 6-10 psi to simulate the low pressure fuel pumps at WOT.
 
Top