Fuel pressure

spanke79

Cadet
Thread starter
Joined
Jul 11, 2016
Messages
19
Whats the fuel pressure suppose to be on 1992 evinrude intruder 175 e175glenc
 

gm280

Supreme Mariner
Joined
Jun 26, 2011
Messages
14,605
spanke79, I'm not sure there is a certain pressure posted for those fuel pumps. Usually the best way to see if the pump is working is to remove the fuel line from the carb(s) and see if there is a nice stream of fuel coming out when the engine it turning over. If there is, your pump is working. If it looks weak, time to rebuilt it or replace it. Most buy a rebuilt kit and rebuilt them. Not hard to do. JMHO!
 

spanke79

Cadet
Thread starter
Joined
Jul 11, 2016
Messages
19
It runs when i pump bulb but once its runs that gas out it sputters and dies so i assume the pump is already dead
 

spanke79

Cadet
Thread starter
Joined
Jul 11, 2016
Messages
19
Weres best place to get rebuild kit new ones cost to much and i mix gas n oil cuz oil pump died n motor blew
 

Faztbullet

Supreme Mariner
Joined
Mar 2, 2008
Messages
15,938
If the oil side of VRO is bad and now fuel side is bad replace the whole thing and don't try to rebuild...also a VRO only pushes fuel when you hear it click, not like a diaphragm pump
 

spanke79

Cadet
Thread starter
Joined
Jul 11, 2016
Messages
19
The primer solenoid will click when it starts running outta gas will die if dont pump bulb to feed it more gas
 
Top