FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
Hi Guys,i am trying to find the fuel mixture for my 50hp mercury. The serial number i have. #9456469. i believe it is 100:1 although i have also been told 50:1. I assume it will foul the plugs if it has too much oil in the fuel.
The merc ignition is so strong it takes about 20:1 and idling to foul plugs.
100:1 will make scrap out of it in a hurry.
All normal mercs (fishin' motors) less than 30 years old take 50:1. Some are VRO (they mix it at a variable rate) and some racing stuff needs more oil.
I have what I believe to be a 1986 50 HP Merc on an 18' Eastern. Boy is it noisy. Would like to re-engine, but weight is an issue/ Can anyone tell me what that 50 HP (3 cyl) weighs?
I think that the motor I have is 3 cylinder, but I could be mistaken -I will check when I go to where the boat is this weekend. If that were the case, then I presume it would be lighter than the 4 cyl.
Given the floatation and the location of self bailers in the old Easterns, weight is an issue. Evinrude and Tohatsu are about 320#
I have a 1976 50 HP mercury....4 cylinder engine...
Do I use 16 oz. For 6 gallons of gas..
I have to advance my idle to get the engine started ...
Should I add Berryman's B-12 for carb cleaning
I have a 1976 50 HP mercury....4 cylinder engine...
Do I use 16 oz. For 6 gallons of gas..
I have to advance my idle to get the engine started ...
Should I add Berryman's B-12 for carb cleaning