fuel gauge,sending unit or float need help!

baxter1111

Recruit
Thread starter
Joined
May 20, 2009
Messages
2
I can fill the tank up and fuel gauge will only register 1/4 of a tank or less. Just wondering if anyone knows what it could be or what i could do to see what the problem may be. Thanks for any help!
 

Silvertip

Honorary Supreme Mariner
Joined
Sep 22, 2003
Messages
28,772
Re: fuel gauge,sending unit or float need help!

If the gauge moves at all, that indicates the gauge is not likely the problem. Since the gauge moves at all that also indicates it is being powered so that is not likely the problem. Since all that's left is the sender, it is very likely the float is either hung up or fuel soaked and can -- well -- no longer float. If you have an ohm meter and know how to use it, you can test the sender. Disconnect the sender wire at either the gauge or the sender. Now measure sender resistance: The sender should measure 33 - 240 ohms over its range. If you have 1/2 tank of fuel the resistance should be 109 ohms give or take a little.
 
Top