A year ago I completely rebuilt a 1968 33' Chris Craft Cavalier Futura FB. In-so-doing, I replaced the 75 USg steel fuel tanks with 103USg aluminum tanks complete with sending units. I rewired the entire boat including the dash, but the fuel gauges have yet to work properly.
When I first turned the key, they didn't respond at all. So, I added a ground wire to each tank's mounting brackets. Immediately, one gauge rose to 1/3 full and the other to 1/4 full. But this is where they have stayed.
Would mounting my grounding wire directly to the sending unit help? I don't see how considering the tank itself has got to be every bit as good a conductor as the 14ga wire I used. Thoughts?
When I first turned the key, they didn't respond at all. So, I added a ground wire to each tank's mounting brackets. Immediately, one gauge rose to 1/3 full and the other to 1/4 full. But this is where they have stayed.
Would mounting my grounding wire directly to the sending unit help? I don't see how considering the tank itself has got to be every bit as good a conductor as the 14ga wire I used. Thoughts?
Last edited: