Flywheel magnet

Dborun

Seaman Apprentice
Thread starter
Joined
Jul 10, 2016
Messages
32
So I got a 64 evinrude 40hp.. I'm trying to time flywheel and has. magnet on only one side of flywheel. Are the points suppose to open when the magnet goes over them or close.
 

gm280

Supreme Mariner
Joined
Jun 26, 2011
Messages
14,605
I am not familiar with your year engine. But usually points open when the crankshaft lobe opens them. And usually that setting is 0.020" as well. But not being able to see a breakdown of your particular engine, that may not be correct. So I would set the point for the lobe opening. The keyway on the flywheel will take care of the initial timing. Others on here will chime in with the correct info I'm sure. JMHO!
 

Dborun

Seaman Apprentice
Thread starter
Joined
Jul 10, 2016
Messages
32
This is model
 

Attachments

  • image.jpeg
    image.jpeg
    49.6 KB · Views: 0

oldboat1

Fleet Admiral
Joined
Apr 3, 2002
Messages
9,612
^^like gm280 says. Set points at the lobe, turn the flywheel 180 degrees clockwise and gap the other one.
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
The timing fixture is nothing but a " dummy flywheel "-----You can use the timing marks on the magplate and flywheel to set the points with a meter.
 

Dborun

Seaman Apprentice
Thread starter
Joined
Jul 10, 2016
Messages
32
ok these are the pics i took..2nd pic the flywheel has 2 arrows at opposite ends. so once i put the flywheel on and rotate the points to match up markings on first picture, do the points have to open? or close?
 

Attachments

  • image1.JPG
    image1.JPG
    51.6 KB · Views: 0
  • image2.JPG
    image2.JPG
    55.3 KB · Views: 0

hardwater fisherman

Lieutenant Commander
Joined
Mar 19, 2010
Messages
1,725
There are some good videos for this on youtube. You need to use a multi meter along with those timing marks.
 
Top