Fixing cracked exhaust manifold on Ford 2.3? need help

A DOG

Recruit
Joined
Oct 4, 2011
Messages
1
I looked at an 89 Bayliner with the 2.3 ford motor. The owner says it has a cracked exhaust manifold. He says he took it out on the lake and it idles fine and will rev up in neutral but when you put it in drive it bogs out.

I am a newbie when it comes to boats and i need to know if i can just weld the crack or if I should just buy new manifolds and risers. I need any info on fixing this problem. maybe good website for the manifold parts and info. I have read that it would be better to get new parts then welding the current and risking further problems down the road.

Any info helps a ton. Thanks guys
 

duped

Petty Officer 1st Class
Joined
Aug 26, 2009
Messages
307
Re: Fixing cracked exhaust manifold on Ford 2.3? need help

If you havent bought it yet, dont. You wont be able to find anything new for that TKO. Obsolete.
 

mxcobra

Chief Petty Officer
Joined
Jun 27, 2011
Messages
526
Re: Fixing cracked exhaust manifold on Ford 2.3? need help

If the exhast manifold leaks, has a crack
You will have water in the bilge, or in your motor.
Welding is not a smart thing to do with theese!!!!
 

HT32BSX115

Supreme Mariner
Joined
Dec 8, 2005
Messages
10,083
Re: Fixing cracked exhaust manifold on Ford 2.3? need help

I looked at an 89 Bayliner with the 2.3 ford motor. The owner says it has a cracked exhaust manifold. He says he took it out on the lake and it idles fine and will rev up in neutral but when you put it in drive it bogs out.

I am a newbie when it comes to boats and i need to know if i can just weld the crack or if I should just buy new manifolds and risers. I need any info on fixing this problem. maybe good website for the manifold parts and info. I have read that it would be better to get new parts then welding the current and risking further problems down the road.

Any info helps a ton. Thanks guys


Howdy,

And Welcome aboard!

Listen to the guys above.

Read the post below,

http://forums.iboats.com/showthread.php?t=334650

I don't think you can buy a manifold for that engine.

Your only choice is something like the following.... http://www.aaamarine.com/servlet/the-2179/2.3-Ford-OMC-Cobra/Detail

Or : http://www.cpperformance.com/p-14909-23l-omc-4-cylinder-replacment-exhaust-manifolds.aspx


The problem here is that the manifold will cost about 5 times more than the boat is worth!!

My suggestion is to just keep looking for a boat if you're in the market. Maybe stay away from boats that have OMC anywhere in the description......


Good luck,


Rick
 
Top