i989 Evinrude 40 HP_ Stripped threads in lower unit drain- any ideas for fix
S scooter@111 Recruit Thread starter Joined Dec 15, 2017 Messages 3 Dec 16, 2017 #1 i989 Evinrude 40 HP_ Stripped threads in lower unit drain- any ideas for fix
C Crosbyman Admiral Joined Nov 5, 2006 Messages 6,298 Dec 16, 2017 #2 jmho... retap and get a bigger plug or.... retap with an install an helli coil insert.... recheck for leaks after a few hours me I usuaslly strip those silly 5/32 allen head plugs :grumpy: not the engine drain threads clear away any metal chips from the gearcase
jmho... retap and get a bigger plug or.... retap with an install an helli coil insert.... recheck for leaks after a few hours me I usuaslly strip those silly 5/32 allen head plugs :grumpy: not the engine drain threads clear away any metal chips from the gearcase
S scooter@111 Recruit Thread starter Joined Dec 15, 2017 Messages 3 Dec 16, 2017 #3 Is the metal thick enough at that point to get enough threads
H hardwater fisherman Lieutenant Commander Joined Mar 19, 2010 Messages 1,725 Dec 16, 2017 #4 I know it is not very thick in that area but the original plug was designed to fit there.
F F_R Honorary Supreme Mariner Joined Jul 7, 2006 Messages 28,226 Dec 16, 2017 #5 Silly question---how does a person go about stripping those threads anyway?
Scott Danforth Grumpy Vintage Moderator still playing with boats Staff member Joined Jul 23, 2011 Messages 53,417 Dec 16, 2017 #7 helicoil kit coat tap with grease to catch chips install helicoil use new gaskets every time you take plug out go boating
helicoil kit coat tap with grease to catch chips install helicoil use new gaskets every time you take plug out go boating