FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
Remove the 2 bolts on the portside of the front motor mount,... Then the spacer block will come out...
Remove the old belt,+ install the New 1,...
Then replace the spacer block,+ the bolts you removed...
And while you that far, install a second belt as a emergancy spare safely tied out of the way. This way you wont have to remove anything to chage the belt is it should break again.
i dont know if there is a difference between a 1978 and 1971 or not but i just changed my belt and went through the same steps but i still had to raise the motor up about 1/2 in. to allow for the belt to slide through the space between the housing and the motor mount.
Thanks for info, what kind of belt is it? Sometimes I can order parts a chevy but the one they give me dosen't fit. That sounds real easy, and that second belt. WOW great idea...
