EZLoader trailer

[rmmalloy]

I have a dual axle EZ Loader carrying a 21 foot Triton. Hate to sound like a dummy, but does anyone know how to remove the taillights from this trailer. Neither are working and I suspect bulbs. Assembly in encased with rubber waterproofing and I can't figure out how to get the darn things off the trailer for inspection Help!

 

[TruckDrivingFool]

Re: EZLoader trailer

Not sure what kind of light you have, but if they're something like these I think you just pop the entire unit out of the grommet and replace it.

 

[kenmyfam]

Re: EZLoader trailer

I have a dual axle EZ Loader carrying a 21 foot Triton. Hate to sound like a dummy, but does anyone know how to remove the taillights from this trailer. Neither are working and I suspect bulbs. Assembly in encased with rubber waterproofing and I can't figure out how to get the darn things off the trailer for inspection Help!

Welcome to iboats.
Photo would help so that we can all see what lights you have on there to begin with. After you have changed the bulbs you will want to check all the ground connections.

 

[BoatNoobie]

Re: EZLoader trailer

if they are like my EZ loader trailer. It's just 2 nuts/bolts that hold the lamps onto the crossmember.

About 12" of wire leads out of the lamps and has a quick disconnect connection.

 

[rmmalloy]

Re: EZLoader trailer

Thanks, guys. It is similar to the picture submitted by truck driving fool. With you assistance, I got it figured out. The housing containing the bulb(s) is sealed but I was able to find new ones on line and ordered today. Thanks again.