Evinrude fleetwin 7.5 wont stay running

08roadking

Recruit
Thread starter
Joined
Aug 18, 2017
Messages
1
Hey there guys I'm new to the forum, so please bare with me. So here it is! I am the proud owner of a evinrude fleetwin 7.5 model number 7518.
So when I first brought it home it started 3rd pull but wasn't pumping water so shut it down before it got hot. Now changed the impeller today and pumps like a dream now my issue is I can not get this thing to run with out spraying starting fuel into the intake. It wants to run but no luck. When I prime the tank the glass bowl on the carb has a slow leak... the original owner said he rebuilt the carb months ago. But I'm not sure any suggestions? I really appreciate the help guys!
 

RCO

Petty Officer 1st Class
Joined
Jun 15, 2016
Messages
350
Check the metal fuel filter in the bowl, they like to plug solid. You could remove it and put in an inline filter if it's bad since they are no longer available. If it is ok, check needle and seat and the float in the carb.
 

Crosbyman

Admiral
Joined
Nov 5, 2006
Messages
6,298
if you are running on a two line hose open the fuel cap to see if any pressure was built up in the tank. pressure is needed to send fuel up to the engine because once the "primed" shot of fuel is burnt off the engine will die if the fuel is not replaced by... pressured fuel from the tank.

​ I assume you are not openning the gas can cap as a vent because that will surely cause the engine to die... keep it closed to allow pressure to build up in the tank

btw... great motors
 
Top