Evinrude eccentric roller - does it wear out?

John Brautigam

Recruit
Thread starter
Joined
Aug 13, 2017
Messages
1
I am adjusting the timing on a 1986 Evinrude V4 90HP. I am having difficulty fine tuning the timing as described in Clymer at page 245, where the instructions say to "rotate the eccentric, tighten the screw and recheck timing." Has anyone had experience with the eccentric roller becoming worn down so that it cannot serve its function of fine tuning the timing? When I rotate the eccentric roller it does not seem to make much difference in the timing at WOT. I am considering replacing the eccentric roller (part number 0330720) but wanted to check what folks think first. Thank you.
 
Top