Evinrude 140 (1991) won't start

Dick D.

Recruit
Thread starter
Joined
Aug 3, 2003
Messages
2
Engine died on last usage. Added new plugs but doesn't appear to be getting any spark. Can the emergency kill be bipassed by cutting and splicing the two wires? I've spent some time trying to get it started and feel the problem is most likely the kill switch.
 

Dhadley

Supreme Mariner
Joined
Feb 4, 2001
Messages
16,978
Re: Evinrude 140 (1991) won't start

Unplug the red cannon (main) plug. Jump across starter solenoid and see if it sparks. If you start it, keep in mind the only way to shut her off is with the manual lever on the primer (flood it out) so have water running to it.<br /><br />I would suggest doing it by a spark check.<br /><br />If it works then, you may indeed have a kill switch bad or (more likely) a bad ignition switch.<br /><br />Good luck!
 

Dick D.

Recruit
Thread starter
Joined
Aug 3, 2003
Messages
2
Re: Evinrude 140 (1991) won't start

Thanks for your help. Will give it a try.
 
Top