Error code dtc222:tps2 voltage low

[Freeman1982]

Hello guys, yesterday on the lake I have this error code and the bout stopped moving even when WOT the engine was on 750 RpM
The error code is

dtc222:tps2 voltage low​

I think is the throttle position sensor
I have 212 regal 2100

Boat information
9724363581
40869324
50gxic270r

Can you please help , I want to know which one is the TPS sensor.
I used to have a link I can add the serial number and model number for the boat and get all the part information. But this link I have doesn’t work . Can you please send me the link and picture of the sensor. Or if I am mistaken can you please tell me what that code ?

I will appreciate your help

 

[mvn]

This?

Throttle Body

Make sure to keep your Volvo Penta Genuine!

www.volvopenta.com

Check all of the electrical connections first. Do you have access to a scan tool?

Mark

 

[muc]

This?

Throttle Body

Make sure to keep your Volvo Penta Genuine!

www.volvopenta.com

Check all of the electrical connections first. Do you have access to a scan tool?

Mark

No.

This looks to be an electronic throttle body. You won’t believe what this part costs. The good thing is this problem is almost always a wiring issue. You might want to get the service manual and wiring diagram to troubleshoot.

 

[muc]

Oops, just reread your post. Says you are at 750 rpm, we call that “forced idle” and a DTC 222 is usually a “derate 2” which holds the engine at about 30% power. You might have more than just this one code. Might need a scan.

 

[muc]

Manuals & Handbooks Volvo Penta US

Workshop manuals, owners manuals and service protocols for your engine. Get your manual and service protocol here.

www.volvopenta.com

 

[Freeman1982]

This?

Throttle Body

Make sure to keep your Volvo Penta Genuine!

www.volvopenta.com

Check all of the electrical connections first. Do you have access to a scan tool?

Mark

Thank you so much for responding, no i don’t have access to a scan tool. How can I get that scan tool

 

[Freeman1982]

No.

This looks to be an electronic throttle body. You won’t believe what this part costs. The good thing is this problem is almost always a wiring issue. You might want to get the service manual and wiring diagram to troubleshoot.

Thanks a lot for response, can you please send me a link so I can inter my engine number and get access to the parts number . Appreciate the help

 

[muc]

Volvo Penta Shop

Find and buy the full Volvo Penta aftermarket assortment for marine and industrial applications. With more than 200.000 genuine parts to support all maintenance and repair you will find all you need. Identify the Volvo Penta engine, shield or drive when looking for spare parts, maintenance...

www.volvopenta.com

always use your engine serial number for best results

 

[muc]

Rinda Technologies Inc. Marine and Industrial Engine Diagnostic Tools

The Official Site of Rinda Technologies, Inc. Designing innovative engine diagnostic tools and software for over 20 Years.

www.rinda.com

 

[Freeman1982]

Hello guys, yesterday on the lake I have this error code and the bout stopped moving even when WOT the engine was on 750 RpM
The error code is

dtc222:tps2 voltage low​

I think is the throttle position sensor
I have 212 regal 2100

Boat information
9724363581
40869324
50gxic270r

Can you please help , I want to know which one is the TPS sensor.
I used to have a link I can add the serial number and model number for the boat and get all the part information. But this link I have doesn’t work . Can you please send me the link and picture of the sensor. Or if I am mistaken can you please tell me what that code ?

I will appreciate your help

Hello guys, yesterday on the lake I have this error code and the bout stopped moving even when WOT the engine was on 750 RpM
The error code is

dtc222:tps2 voltage low​

I think is the throttle position sensor
I have 212 regal 2100

Boat information
9724363581
40869324
50gxic270r

Can you please help , I want to know which one is the TPS sensor.
I used to have a link I can add the serial number and model number for the boat and get all the part information. But this link I have doesn’t work . Can you please send me the link and picture of the sensor. Or if I am mistaken can you please tell me what that code ?

I will appreciate your help

 

[Freeman1982]

I checked all the connection wires all looks good , any help please

 

[Freeman1982]

Is this the TPS sensor , do you think this is the problem?

 

[Freeman1982]

From where I buy the scan tool any link I can buy it ?

 

[Freeman1982]

By the way last time when I was at the lake I start losing power like when i put the boat on WOT the RPM stay on 3000 and the speed stuck on 10 Mph then I asked my friend to change their seat to the front after that the rpm start raising and the speed back to normal and passed the 10 mph, this happened with me two days before the boat fault

 

[muc]

By the way last time when I was at the lake I start losing power like when i put the boat on WOT the RPM stay on 3000 and the speed stuck on 10 Mph then I asked my friend to change their seat to the front after that the rpm start raising and the speed back to normal and passed the 10 mph, this happened with me two days before the boat fault

Do you have 2 engine lights on your dash, a red and amber?
When this happened did they light up or did you get a warning horn or other notification?

 

[mvn]

No.

This looks to be an electronic throttle body. You won’t believe what this part costs. The good thing is this problem is almost always a wiring issue. You might want to get the service manual and wiring diagram to troubleshoot.

Volvo # 21141689 - ~$600 USD....ouch!

Mark

 

[muc]

Is this the TPS sensor , do you think this is the problem?

Yes, the two TPSs are inside where your finger is.
Probably not, only way to know is to troubleshoot it.

 

[Freeman1982]

Thanks a lot I replaced it and get the boat running

Yes, the two TPSs are inside where your finger is.
Probably not, only way to know is to troubleshoot it.

 

[Freeman1982]

Yes, the two TPSs are inside where your finger is.
Probably not, only way to know is to troubleshoot it.

Thank you very much I replaced it and get the boat running

 

[muc]

Thank you very much I replaced it and get the boat running

I’m surprised that was your problem, pretty rare for that to fail.
I’m glad you got it fixed.