Engine stalling out, will go from fast to slow even with throttle all the way down

NDDyer

Recruit
Joined
Jul 27, 2011
Messages
1
Hello,

I am new boat owner and just recently bought a 1987 Four Winns Horizon 170.

It is a 17' bowrider inboard/outboard 6-cylinder 4.3

Hull ID 4wnte098k687

Vehicle ID 1mdbeet15hj291163

The engine is an OMC Cobra stern drive. The boat works fine but there seems to be some issues with the engine and the throttle. Sometimes it works but most of them time it either stalls out or will slow down even when the throttle is pushed to the max, then speed up and slow down again. I've found that I have had to baby the throttle just to prevent it from stalling. My friend says it might be the fuel line? What do you guys think? How can I fix it?

Thanks,

Nick
 
Last edited:

Bondo

Moderator
Staff member
Joined
Apr 17, 2002
Messages
71,389
Re: Engine stalling out, will go from fast to slow even with throttle all the way dow

Hello,

I am new boat owner and just recently bought a 1987 Four Winns Horizon 170.

It is a 17' bowrider inboard/outboard 6-cylinder 4.3

Hull ID 4wnte098k687

Vehicle ID 1mdbeet15hj291163

The engine is an OMC Cobra stern drive. The boat works fine but there seems to be some issues with the engine and the throttle. Sometimes it works but most of them time it either stalls out or will slow down even when the throttle is pushed to the max, then speed up and slow down again. I've found that I have had to baby the throttle just to prevent it from stalling. My friend says it might be the fuel line? What do you guys think? How can I fix it?

Thanks,

Nick

Ayuh,... Welcome Aboard,...

Have ya checked the fuel filters for debris,..??
 

ken emigh

Recruit
Joined
May 17, 2011
Messages
1
Re: Engine stalling out, will go from fast to slow even with throttle all the way dow

Ayuh,... Welcome Aboard,...

Have ya checked the fuel filters for debris,..??

Have 88 four winns with v-6 was doing simular. I finally pulled the fuel pick up tube from fuel tank. It was plugged! Reinstalled tested boat at different rpm's. working fine now.

Ken
 
Top