Elusive Johnson/Evinrude Lower Unit

BassPastor

Recruit
Thread starter
Joined
May 17, 2018
Messages
4
Hello good folks of iBoats!

I'm on the hunt for the elusive 1978/1979 Johnson/Evindrude 35 hp lower unit. Apparently they made clutch dogs of Play-Doh these years so there doesn't seem to be many left. Does anybody have or know of one that still exists? If so, I'd be interested in purchasing.

Motor is a Johnson Model 35EL78R


Many thanks!
 
Last edited by a moderator:

Rustywrench

Petty Officer 1st Class
Joined
May 10, 2018
Messages
209
You might try Pine Lake Parts, Plainwell, MI. Large salvage yard. Southcentral Outboard is another in Beecher City, IL.
 

jimmbo

Supreme Mariner
Joined
May 24, 2004
Messages
14,699
1976 - 1979 gears are the first design, with water lnlets forward of the driveshaft. In 1980, the inlets were moved to behind the driveshaft, probably to reduce clogging/covering of the inlets. The two designs are not interchangeable due to relocation of shiftshaft coupler
 

BassPastor

Recruit
Thread starter
Joined
May 17, 2018
Messages
4
jimmbo I very well could be wrong, but I’m pretty sure the only compatible LU’s are ‘78-‘79. Even the ‘76-‘77 are different. Hence the troubles I’ve had in finding one.

There’s no doubt that improper shifting leads to warn dogs and gears, but there is also most definitely some questionable reliability in these particular models. That being said, it’s an old motor, and you get what you get with old motors.

Thanks for the help! I’ve learned a degree from this forum before finally joining to ask this question.
 

Lightwin 3

Petty Officer 1st Class
Joined
May 18, 2010
Messages
300
I don't think the clutch dogs were made of Play-Doh so much as the operators heads were. Improper shifting technique will hasten wear on those parts.

iboats appears to have the part
http://ww2.iboats.com/FF-SHIFTER-C-D...iew_id.1501128

I second that, however, 35 HP was really all that L/U could handle somewhat reliably.

And, there's always the bungee cord option to hold it in gear. A friend of mine has chosen that option for going on 20 years now with his Evin. 35,
 

BassPastor

Recruit
Thread starter
Joined
May 17, 2018
Messages
4
I’ve wondered if the “2 tooth” clutch dog design has attributed to early wear as well. That puts more torque and therefore wear on the edges of the clutch as compared to the 3 tooth design.

As as previously stated, I wish previous owners would have known how to shift properly. The motor is new to me.
 
Top