electronic speedo

earlcathy

Recruit
Thread starter
Joined
Mar 28, 2009
Messages
2
I recently purchased a 2001 Rinker Captiva 192. It has an electric VDO spedo that does not work. It has a thruhull transponder. I can'T find any troubleshooting info.When I first turn on the ignition it jumps to 10 to 15 mph and then drops to 0 and stays there.
 

rjwoodrome

Petty Officer 1st Class
Joined
Aug 23, 2008
Messages
202
Re: electronic speedo

Does it stay there while under way? I mean on zero mph. if yes check the speed sending unit for an obstruction on the inlet. maybe a pinched tube? one of my buddies does the same recalibration thing then works fine.. also check if the sending unitis in the correct down position...also check all electrical connections related to the unit for corrosion
 

earlcathy

Recruit
Thread starter
Joined
Mar 28, 2009
Messages
2
Re: electronic speedo

Turns out it does use the pitot in the sterndive that connects to sensor that changes the preasue to electrical output to the speedo. the tube was off at the drive. I havent figured out waht the thruhull transponder is for yet because the fishfinder has it's own unit attached to the transum.
 
Top