electric shift tilt unit

bck419

Cadet
Joined
Nov 8, 2010
Messages
7
I have rebuilt the whole tilt unit and replaced the motor. but not the wiring yet. I wanted to see if it was working so I hooked up a remote push button starter wire... so it goes up kinda fast and down really fast and slammed in place! is this normal?? Thanks Bruce
 

southkogs

Moderator
Staff member
Joined
Jul 7, 2010
Messages
15,096
Re: electric shift tilt unit

It should go up moderately quick ... shouldn't really fly up. Going down, it will kinda' move on you. Typically the trick is to tap the tilt switch so it doesn't slam down.
 

bck419

Cadet
Joined
Nov 8, 2010
Messages
7
Re: electric shift tilt unit

great, sounds like I got it right... now if I keep the water out!!! thanks Bruce
 

southkogs

Moderator
Staff member
Joined
Jul 7, 2010
Messages
15,096
Re: electric shift tilt unit

Tell me about it. That thing just sits WAY too close to the bilge.
 
Top