E140TLCEB removing lower unit

racerfern

Cadet
Thread starter
Joined
Jul 31, 2017
Messages
9
I'm in the process of changing out the water pump and I'm stuck on the shift linkage. Basically, does the long shift linkage rod come down with the lower unit, or is there some kind of inner/outer sleeve that goes into the long shaft from just below the carbs?
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
The shift rod comes down with the lower unit.-----Find the hitch pin on that horizontal shaft below the carburetors.-----Remove that hitch pin.-----Push that shaft toward the port side to disconnect the shift rod.------Shift rod must not be turned as it is set to a precise dimension !!
 

racerfern

Cadet
Thread starter
Joined
Jul 31, 2017
Messages
9
Aha! There's another hitch pin I'll have a closer look in the morning. Thanks! So it doesn't really look like any of the pictures in the seloc on-line manual. That's what's confusing.
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
Above method if for crossflow motors, just ignore
 
Last edited:
Top