E130

boatman2011

Recruit
Thread starter
Joined
Mar 3, 2011
Messages
3
Have an 195 Evinrude 130 V4 and idle speed is too slow when in the water. Idles fine with water hose.Which screw will increase the idle slightly? Thanks
 

boatman2011

Recruit
Thread starter
Joined
Mar 3, 2011
Messages
3
1996 Evinrude 130 idle adjustment. Any help on how to increase rpm slightly at idle is appreciated.
 

James R

Commander
Joined
Feb 1, 2007
Messages
2,681
I suspect that you have an OIS ignition 60* motor. According to the manual there is no simple way to set it without the analyzer. Carb idle jet adjustments may help. Too slow is a relative term. What makes you say that.
 

flyingscott

Fleet Admiral
Joined
Apr 8, 2014
Messages
8,348
Did you do a spark and compression test also need a model#. A 1995 model could be the big block looper 4 cylinder. Not sure if that had the OIS.
 
Last edited:
Top