Drain Release of cooler in 2004 Tahoe Q4 sf

Boatman606

Cadet
Joined
May 15, 2012
Messages
10
Need some help with how the drains release in the coolers. Just bought the boat, so im new to it. all 3 coolers hold water but and im boggled on how to get it to release. Or am i off base and it doesnt have one and is clogged? Thanks in advanced
 

spdracr39

Lieutenant Junior Grade
Joined
Aug 30, 2010
Messages
1,238
Re: Drain Release of cooler in 2004 Tahoe Q4 sf

My coolers have a rubber plug to keep it from draining. You just pull the plug and it drains into the bilge. If the hole is open it should be draining.
 

fish hook

Petty Officer 3rd Class
Joined
Jul 22, 2011
Messages
94
Re: Drain Release of cooler in 2004 Tahoe Q4 sf

No stoppers on my 04. Must be plugged? Mine drains fine
 

dswanson79

Cadet
Joined
Sep 10, 2008
Messages
8
Re: Drain Release of cooler in 2004 Tahoe Q4 sf

I had this problem. There should be cup holders in the area remove them they should pop right out. This give you access to the hoses that are about 10" long and hooked to the back side of the drain with a clamp. There should be round holes in the area and the hoses tend to pop up and out of the holes not allowing gravity to drain the water into the boats hull. Simply push them back down into the hole and gravity will allow them to drain again.
 
Top