DPSM gimbal bearing

mklearl

Petty Officer 1st Class
Joined
Apr 21, 2013
Messages
379
I cannot find the correct part number for the gimbal bearing for a Dpsm. If anyone has a part number it would be appreciated. I am not looking for the new greaseless one. I would like to grease it. Also, stripped the zerk fitting out of the plastic tube so I am looking for part numbers for the grease fitting and tube.
Thanks in advance.
 

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
49,538
There is only one gimbal bearing and it fits both Volvo and Mercruiser
 

Fun Times

Moderator
Staff member
Joined
May 16, 2009
Messages
9,046

DPSM is your stern drive model when it comes to finding part numbers which generally will only help finding drive parts.

The other parts you are looking for would be found from your transom model number info which is a different number than the drive.

There should be a plate on the transom shield assembly with numbers on it too that would help with all the parts mounted to the boat between the drive and engine.
 

mklearl

Petty Officer 1st Class
Joined
Apr 21, 2013
Messages
379

DPSM is your stern drive model when it comes to finding part numbers which generally will only help finding drive parts.

The other parts you are looking for would be found from your transom model number info which is a different number than the drive.

There should be a plate on the transom shield assembly with numbers on it too that would help with all the parts mounted to the boat between the drive and engine.
So I have the serial number for both the drive and the transom assembly. Is there a site I can use to enter the serial number and find correct parts?

Thank you again.
 

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
49,538
Any of the Volvo parts sites such as volvopentastore.com
 
Top