Do yourselves a favor........

Art Bernard

Banned
Thread starter
Joined
May 4, 2011
Messages
333
Since I started hanging out on this forum, it amazes me how many people have problems with stuff draining their batteries. I'm not knocking anyone, but I highly recomend that everyboat have a master battery kill switch installed. I use a rotary switch from perko for my dual battery set up, but you don't have to have 2 batts to run the switch. I also don't recomend wiring anything directly to the batt (with exception of sensor for auto bildge pump). My opinion is that power goes from the batt, through the kill switch, to the fuse box and all stuff is wired to the fuse box. This way, at the end of the day after you've washed the boat and flushed the engine, you simply turn the kill switch off and now you don't have to worry about it. It is also a great safety device incase of electrical fire or wiring problem. Simply turn off the switch and all power to everything is off. Trust me, they are worth the investment.

Art
 

wifisher

Chief Petty Officer
Joined
Mar 9, 2011
Messages
578
Re: Do yourselves a favor........

Most problems with battery drains are caused by improper wiring, bad batteries, or extended periods of non-use. If your electrical system is installed properly, and fused properly, there is no fire danger. Nor is there a drain on your battery. Battery isolators have their use in a lot of boats, but stopping a parasitic drain is not what they are for. If you have a parasitic load you should just fix it, and not install extra un-needed components. And turn off anything that is drawing from the battery before you leave the lake.
 

sw33ttooth

Chief Petty Officer
Joined
Apr 24, 2011
Messages
498
Re: Do yourselves a favor........

i find that maybe 50% of posts could be deleated and were worthless to type up if you accualy take the time to assess the situation before you post you probably wont end up posting. most are simple questions and get a ton of responses although there are quite a few posts that the people don't accurately discribe the problem or show a good picture to aid in there ditress. could be people are not as knowlegable as i am and it all leads to the same place not wanting to pay a repair man $200.00 an hour and letting your boat sit till he thinks that he has time. i turn my batteries off or to 1 battery if i know i am going to be beached for a few hours just so i dont end up with a dead battery from fish/depth finder to radio and lights. accept when i had my johnson v4 90 horse if i had a dead battery i'd just pull start it since it started so easy.
 

RZR2007

Petty Officer 2nd Class
Joined
Apr 6, 2011
Messages
137
Re: Do yourselves a favor........

i find that maybe 50% of posts could be deleated and were worthless to type up if you accualy take the time to assess the situation before you post you probably wont end up posting. most are simple questions and get a ton of responses although there are quite a few posts that the people don't accurately discribe the problem or show a good picture to aid in there ditress. could be people are not as knowlegable as i am and it all leads to the same place not wanting to pay a repair man $200.00 an hour and letting your boat sit till he thinks that he has time. i turn my batteries off or to 1 battery if i know i am going to be beached for a few hours just so i dont end up with a dead battery from fish/depth finder to radio and lights. accept when i had my johnson v4 90 horse if i had a dead battery i'd just pull start it since it started so easy.

Really???
 

Sixmark

Master Chief Petty Officer
Joined
Jul 11, 2010
Messages
890
Re: Do yourselves a favor........

The point being made is that some people will come on the site and expect others to guide them through every little step, many of those steps would be included in a service manual when it comes to the motors, or would probably have already been discussed and could be located by doing a simple search on the forum itself.

We don't mind helping people, however having people serve as a replacement for spending money on a manual or actually doing the legwork yourself is often exploited. All anyone has ever asked is that people do some research, be descriptive, post photos when you can.

One of the most often overlooked information lines is when people don't bother to say what they are even working on.......you have to help yourself before others will help you.
 

Art Bernard

Banned
Thread starter
Joined
May 4, 2011
Messages
333
Re: Do yourselves a favor........

I don't see a kill switch as an un-needed piece of equipment. To me it aids in managing your batteries and in case of an electrical fire, it provides a quick, easily accessable point to secure power. When putting out an electrical fire the first step is to turn off the power. Evan if your boat is perfectly wired $*%@ happens and I like to be prepaired. Safety first.

Art
 

BaileysBoat

Senior Chief Petty Officer
Joined
Sep 29, 2008
Messages
716
Re: Do yourselves a favor........

I don't see a kill switch as an un-needed piece of equipment. To me it aids in managing your batteries and in case of an electrical fire, it provides a quick, easily accessable point to secure power. When putting out an electrical fire the first step is to turn off the power. Evan if your boat is perfectly wired $*%@ happens and I like to be prepaired. Safety first.

Art

Agree. A battery master switch has been on my "to do" list for a while now.
 
D

DJ

Guest
Re: Do yourselves a favor........

I don't see a kill switch as an un-needed piece of equipment. To me it aids in managing your batteries and in case of an electrical fire, it provides a quick, easily accessable point to secure power. When putting out an electrical fire the first step is to turn off the power. Evan if your boat is perfectly wired $*%@ happens and I like to be prepaired. Safety first.

Art

That's one of the first pieces of equipment I add on a new boat or a restoration. It just makes sense.
 

Sixmark

Master Chief Petty Officer
Joined
Jul 11, 2010
Messages
890
Re: Do yourselves a favor........

Can we stress an approved cutoff switch

I watched a guy lose all of his facial hair last year because he had a standard copper breaker switch located very close to the fuel tanks, when he flipped the switch on, it arced........can you guess what happened next?
 
Joined
May 1, 2011
Messages
10
Re: Do yourselves a favor........

Question : If I have a waterproof battery tender installed on each battery and simply plug in when my boat is stored, would these chargers be defeated if I installed the master battery battery kill switches mentioned?
 

Art Bernard

Banned
Thread starter
Joined
May 4, 2011
Messages
333
Re: Do yourselves a favor........

If the tenders are connected directly to the pos and neg terminals of the batts it'll work just fine.

Art
 
Joined
May 1, 2011
Messages
10
Re: Do yourselves a favor........

Thanks for the feedback Art. I will definately look at picking up a pair. Thanks again !
 

RZR2007

Petty Officer 2nd Class
Joined
Apr 6, 2011
Messages
137
Re: Do yourselves a favor........

The point being made is that some people will come on the site and expect others to guide them through every little step, many of those steps would be included in a service manual when it comes to the motors, or would probably have already been discussed and could be located by doing a simple search on the forum itself.

We don't mind helping people, however having people serve as a replacement for spending money on a manual or actually doing the legwork yourself is often exploited. All anyone has ever asked is that people do some research, be descriptive, post photos when you can.

One of the most often overlooked information lines is when people don't bother to say what they are even working on.......you have to help yourself before others will help you.

Good point, I do see this alot...
 

Art Bernard

Banned
Thread starter
Joined
May 4, 2011
Messages
333
Re: Do yourselves a favor........

Just going through old posts and wanted to bump this one x2 six's statement to use a proper marine switch (rotary type imo) that is designed for marine use and safe, since safety is one of the main uses of the switch, don't dummy up and do what the guy he talked about did.

Art
 
Top