different lower unit than expected? plz help. 77 75hp evinrude

Landonsideways

Seaman Apprentice
Thread starter
Joined
Mar 29, 2017
Messages
33
I have been getting ready this motor, says 75743s on engine mount, will show pics. Took lower unit off and my water pump kit I got isn't matching what I got physically. Is this a 70 hp lower unit? How can I tell? Thought I was going to be changing water pump today, guess not. Will it be ok to use this lower unit? Plz help....
 

Attachments

  • 20170413_112902.jpg
    20170413_112902.jpg
    42.5 KB · Views: 0
  • 20170413_112722.jpg
    20170413_112722.jpg
    48.4 KB · Views: 0
  • 20170413_111415.jpg
    20170413_111415.jpg
    56.2 KB · Views: 0
  • 20170413_112746.jpg
    20170413_112746.jpg
    36.6 KB · Views: 0
  • 20170413_112920.jpg
    20170413_112920.jpg
    48.7 KB · Views: 0

Landonsideways

Seaman Apprentice
Thread starter
Joined
Mar 29, 2017
Messages
33
Few more pics. f63 is on lower unit
 

Attachments

  • 20170413_112708.jpg
    20170413_112708.jpg
    49 KB · Views: 0
  • 20170413_111129.jpg
    20170413_111129.jpg
    51.2 KB · Views: 0

hardwater fisherman

Lieutenant Commander
Joined
Mar 19, 2010
Messages
1,725
You say the pump kit is not the right one. What is the differences?Even if it is a 70hp gearcase. It appears the 70hp and 75 hp uses the same impeller and pump kit. That is just what I saw when taking a quick look here at IBOATS.
 
Last edited:

Landonsideways

Seaman Apprentice
Thread starter
Joined
Mar 29, 2017
Messages
33
Well at first I thought the holes didn't line up. I'm a newbie first and foremost. The keys are different kinds. The holes DO line up, so I apologise for that, but the plates slits are different sizes and the keys are different. One is half moon and the other is the plastic one that is weird shaped. Pic below. Is that ok. Can I still use this key with that shaft? Sorry if it is a stupid question, my first rodeo...
 

Attachments

  • 20170413_122214.jpg
    20170413_122214.jpg
    36 KB · Views: 0

hardwater fisherman

Lieutenant Commander
Joined
Mar 19, 2010
Messages
1,725
I asked the questions because probably someone will come along with the right information. You may have to reuse the old key if it fits in the new impeller. I am not sure about the slits in wear plate. But probably is not a problem.
 

Landonsideways

Seaman Apprentice
Thread starter
Joined
Mar 29, 2017
Messages
33
The new impeller has a straight cut out, the old one has a cut out that fits that other key. That's why I'm stumped. Impossible to interchange
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
The simple facts.------------The lower unit on your motor is a replacement.---------Nothing wrong with that fact.-----------A lower unit from a 1988 model will fit.--------------You need to order an impeller for say an 87 model to get a proper fit for the key.-----That is all you need to look up.----That is why you need to take things apart before you visit your local / knowledgeable / friendly dealer with part you took off.
 

Landonsideways

Seaman Apprentice
Thread starter
Joined
Mar 29, 2017
Messages
33
I didn't realize that if the motor says a 77 75 hp evinrude that it may be a different lower unit. I live in Meade ks, no boat shop, hell even no auto parts store... My first boat. First time doing any of this. Found this website which I thought would be a god send to me if I needed help, and hell I like learning from others.

My question. When you have a half moon key instead of wedge key, Is that how all shafts look? Or do the ones that have the half moon keys have a straight slot like what say a lawn mower shaft has.
 

Attachments

  • 20170413_140553.jpg
    20170413_140553.jpg
    45.1 KB · Views: 0
  • 20170413_140613.jpg
    20170413_140613.jpg
    46.1 KB · Views: 0
  • 20170413_140644.jpg
    20170413_140644.jpg
    42.7 KB · Views: 0

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
Sorry, one more try.------Post # 8 has the CORRECT information for you.----Do not re-engineer the fitting of the keys.----Get the right impeller or kit.----Order the factory impeller for an 87 model 70 hp and it comes with the right fitting key and one you throw out.-----Instructions too.
 

Chinewalker

Fleet Admiral
Joined
Aug 19, 2001
Messages
8,902
The half-moon key type is not interchangeable with the slotted key type. As noted above, you appear to have gotten a lower unit from a later motor. If you got the whole kit, you may just need to order the impeller to fit the later style shaft, using the rest of the kit you've already purchased.
 

Landonsideways

Seaman Apprentice
Thread starter
Joined
Mar 29, 2017
Messages
33
Racerone, how sure are you that an 87 70 hp impeller and key is the correct one for my application? If you say to do it I will 100% order it. Like I said I don't know what you know. Just trying to do some fishing man... And thanks
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
Sorry, post # 8 and 10 have the correct information for you !!----I could rebuild powerhead and bottom of your motor without a glance at a manual.
 
Top