Cooling hose kit

[flashback]

I need some help with selecting which kit to get. so many different variations to choose from.. If Iboats has one, I'll get it from them, figure the least I can do for all the help I get here.. Thx

 

[flashback]

I'm a little slow today, I forgot you can't see my sig on the phone..

1995 5.7. S# 0F289690
Thx

 

[Bt Doctur]

Whats a "cooling kit"

 

[flashback]

Whats a "cooling kit"

 

[flashback]

Just looking for a set of cooling hoses for my application, seems there are many different setups. I have a leaky hose from the PS cooler to the thermostat housing figured maybe to replace all and have seen many online and all different.. the thermostat housing has 6 ports.

 

[achris]

You may have to order each hose individually.

 

[flashback]

You may have to order each hose individually.

I just replaced an elbow and the hoses feeding the top have been replaced as they say Dayco. the fresh water input from the cooler is the immediate concern as it aged and weeping. The others are probably not far behind. Just thought I'd replace all

 

[Bondo]

I just replaced an elbow and the hoses feeding the top have been replaced as they say Dayco. the fresh water input from the cooler is the immediate concern as it aged and weeping. The others are probably not far behind. Just thought I'd replace all

Ayuh,..... Ya still gotta order each one,.....

 

[flashback]

Well ain't I the lucky one! Do you guys have a suggestion and part no. for the cooler to the thermostat?
It's a tough bugger to get to being down under the motor mount, the others would be a piece of cake. I haven't cut it off yet but suspect it's 1.
25 id.. thought about getting some of the blue silicone hose, but it's pricey. Hook me up with the right part on iboats. If they have it I will purchase.

And thanks to you all, I can turn a wrench with your guidance..

 

[achris]

Well ain't I the lucky one! Do you guys have a suggestion and part no. for the cooler to the thermostat?
It's a tough bugger to get to being down under the motor mount, the others would be a piece of cake. I haven't cut it off yet but suspect it's 1.25 id.. .

Looks like this might be the one..

Mercury-Mercruiser 32-96246A4 HOSE

Mercury-Mercruiser 32-96246A4 HOSE genuine factory part not aftermarket. Fast shipping - Click here to see live inventory status

www.mercruiserparts.com

 

[flashback]

Looks like this might be the one..

Mercury-Mercruiser 32-96246A4 HOSE

Mercury-Mercruiser 32-96246A4 HOSE genuine factory part not aftermarket. Fast shipping - Click here to see live inventory status

www.mercruiserparts.com

Thanks, that looks like it has the proper curves, I will need to take the old one off and get some measurements. Those folks are proud for sure... LOL

 

[Scott06]

200 (2 BBL.) GM 305 V-8 1987 - 0B525982 THRU 0B774444

200 (2 BBL.) GM 305 V-8 1987 - 0B525982 THRU 0B774444

www.mercruiserparts.com

thers three different cooling systems listed links on bottom of this page , gotta look through them and see which one matched what youve got

 

[flashback]

200 (2 BBL.) GM 305 V-8 1987 - 0B525982 THRU 0B774444

200 (2 BBL.) GM 305 V-8 1987 - 0B525982 THRU 0B774444

www.mercruiserparts.com

thers three different cooling systems listed links on bottom of this page , gotta look through them and see which one matched what youve got

Thanks for the link Scott,
I believe I have the gen 3 configuration and believe the hose to be 32-806856. I need to get another elbow for the starboard side so I may just get the hose at the same time from my local dealer. He's been in the business around here for a long time, good man and prices are comparable to most online dealers. Heck, he even has offered to let me try different props as long as I don't scratch-em...

 

[Scott06]

Heck, he even has offered to let me try different props as long as I don't scratch-em...

That’s what a good dealer will do fair mark up and some support and service