control cables

toad791

Recruit
Joined
Jun 24, 2006
Messages
4
I have a 1966 evinrude 33hp ski twin and my control cables are bad..can anyone tell me what I can replace them with. thanks
 

tashasdaddy

Honorary Moderator Emeritus
Joined
Nov 11, 2005
Messages
51,019
Re: control cables

i boats store, use the 1800 number and call iboats. they have a direct lick to teleflex, who bought morse cables. you most likely have a morse controller.
 

BoatBuoy

Rear Admiral
Joined
May 29, 2004
Messages
4,856
Re: control cables

Teleflex designation is Johnson®/Evinrude® pre-1979 CC170xx (400 type) , where xx is the length needed.
 

toad791

Recruit
Joined
Jun 24, 2006
Messages
4
Re: control cables

I have looked up the teleflex cables and the ends look different. Do I need to use the ends that are on my old cables?
 

BoatBuoy

Rear Admiral
Joined
May 29, 2004
Messages
4,856
Re: control cables

You can. Actually, mine came with correct engine-side connectors which I didn't order special. I did have to use the toothed rack that was on the helm-end of the cables.
 
Top