Re: Compression Test Procedure
the best way to test is on a warm engine because everything is expanded
what i do is this
#1 pull the stop switch out (engine will turn over but no spark)
#2 pull out the plug u want and replace it with the tester, while all the other plugs are in
#3 MAKE SURE U PUT THE CARBS IN THE OPEN POSITION, if u do not might take more than a 10 second count and u could burn out ur starter motor,
#4 crank over for 10 second count or until the needle in the guage does not rise, write down the reading
#5 due #3 to the rest of cylinders
#6 the cylinders should be within 10%
there u go
if u have a remote starter would be help full also
