Cold start for Evinrude 150 XP

mljack2

Recruit
Thread starter
Joined
May 30, 2017
Messages
2
I have a 1989 Evinrude 150XP It is extremely hard to start when cold, requires a lot of choking or sometimes starting fluid. Once started it runs good and starts easy. Use throttle advance but that doesn't seem to help. What is proper procedure for cold start?
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
Step # 1 on that motor is a compression test.----Report your numbers.----Next is to test the fuel primer valve.----The thingy with the red lever, does it click when key is pushed in.-----Key is to be pushed in while cranking for the fuel primer to give near instant starts when cold.
 

mljack2

Recruit
Thread starter
Joined
May 30, 2017
Messages
2
OK, I need to get a compression tester, and I will report back. Thanks
 
Top