Im having problems with my 87 mercury 45hp classic 50. Wouldnt run due to no spark. I replaced the switch box and runs now but with a slight miss. I took it to the lake and dies under a load. Pumping the throttle seemed to help. pumping the primer bubble had no effect. At first if I reved it in fast idle and switched it into gear quick it would run about half power for 30 sec or so then try to bgg and die. Bringing it back to idle or nutreal would keep it running. After some playing with it I would put it in gear and it would now run FULL power but again for 30 sec or so then bogg. Bogg was more time related then rpm. I went through the carbs, cleaned them and repaced all the seals. Gas is new. Good spark to all 4 cylinders. All the plugs look the same. Slightly wet with black. I would really appreciate and thoughts or encouragement. Thanks.