FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
Yes I have a 1983 Johnson 90hp model j90tlcte and my prop is a 9x13 the motor is on a 17 ft Jason bass boat 9 inch diameter seem a little small any guidence would help
13" diameter is what it should be (13 1/2" should fit too). The 9 is most likely a 19 with paint in the one, or just a light stamping.
19p may be a bit much for a 90hp, a 17p may do a better job for you.
It appears to me that is intended for a 25 hp.its probably a 13 spline.I'm su8rprised if a 25 prop would fit a 90 prop shaft.
It is likely that setup would have about a 13 1/4" X 17 or 19" prop.
