Cherokee Boats by Mckenzie Boat Manufacturing Company

Status
Not open for further replies.

jhendery

Petty Officer 1st Class
Joined
Jun 14, 2012
Messages
336
Thanks to the mods for creating this new space for Cherokee boats.

We know the following Cherokee models were manufactured by McKenzie Boat Manufacturing Company.

Look forward to hearing about your Cherokee

1900 Catalina
1800 Catalina
1600 Catalina
1600 Avalon
1500 Sea Lark - Catalina
1500 Sea Lark - Avalon
1500 Bolero
1450 Playboy



 

ssdale

Starmada Splash of the Year 2016
Joined
Nov 4, 2011
Messages
285
Finally had time to post a few re-shots of a Cherokee project I finished a couple of years ago. My original photos will not load onto the forum ( i tried re-sizing and still error message), so the photos are screen shots of the originals. The pics quality is good enough to help someone identify their Cherokee and get an insight into the resto- Hope the moderator agrees:usa2: It is a 1965 Cherokee Playboy outfitted with a 1965 Mercury 500. Bought off c-list for $100 without trailer. The owners said it had been laying in their backyard since 1993 and they were thinking of making a goldfish pond out of it since it held water so well:help:. It is equipped with all the original Tom Faul Nautalloy hardware and steering wheel. More to come! 100_4594.jpg
100_4591.jpg 100_4592.jpg 100_4593.jpg 100_4596.jpg 100_4597.jpg
 

ssdale

Starmada Splash of the Year 2016
Joined
Nov 4, 2011
Messages
285
These next pics show the take apart, repair and prep of the Cherokee 100_4598.jpg 100_4599.jpg 100_4600.jpg 100_4601.jpg 100_4602.jpg 100_4603.jpg 100_4604.jpg 100_4605.jpg 100_4607.jpg 100_4608.jpg
 

ssdale

Starmada Splash of the Year 2016
Joined
Nov 4, 2011
Messages
285
The first pic is of the Nautalloy Aquabird hardware that I mentioned in the earlier post. I splurged and sent it to the chrome shop about and hour away. luckily the original spotlight and transom handles were in nearly perfect shape! I know that there are a lot off shots of the boats masked off for paint, but it was a big job:joyous:
Used zinc chromate primer in rattle cans from the local outboard store. They were a little more expensive than at the autozone, but i believe superior quality-and you don't want to do this twice. Paint next post!!
Dale
100_4610.jpg 100_4611.jpg 100_4614.jpg 100_4616.jpg 100_4617.jpg 100_4619.jpg 100_4620.jpg 100_4621.jpg 100_4622.jpg 100_4623.jpg 100_4624.jpg 100_4626.jpg 100_4627.jpg
 

ssdale

Starmada Splash of the Year 2016
Joined
Nov 4, 2011
Messages
285
100_4628.jpg 100_4629.jpg Now for the best part IMHO of any project- PAINT and CHROME. I shot the paint over the course of a few days and I am very proud of the results with a $40 gun. Not show quality but really gets a lot of looks. The chrome came back great and the original pieces shined up great. Added plenty of flotation foam before reviting down the plywood floor.
Dale

100_4630.jpg 100_4631.jpg 100_4633.jpg 100_4635.jpg 100_4636.jpg 100_4638.jpg
 

ssdale

Starmada Splash of the Year 2016
Joined
Nov 4, 2011
Messages
285
Used steel wool and Mothers on all the aluminum bump rail and trim. Pics of the re-assembly including new windshield gasket. Amazing how well the windshield itself held up to all those decades of exposure!
100_4639.jpg 100_4640.jpg 100_4641.jpg 100_4642.jpg 100_4644.jpg 100_4645.jpg 100_4646.jpg 100_4647.jpg 100_4649.jpg
 

ssdale

Starmada Splash of the Year 2016
Joined
Nov 4, 2011
Messages
285
Biggest expense, other than the motor, was the lounge seats off of ebay. I had to cut the plastic mounting boxes way down and reinforce to get them low enough to look right. Here are a few pics of her out on the Missouri River- a little bit daunting for me as a newbie and all 1965 equipment. We,ve been back many times since. A few befores and afters also. Remember, these are screenshots of my original pics. so again my apologies on the quality, but could not get them to upload any other way. A McKenzie Mfg/Cherokee Playboy saved from being a fishpond:facepalm::laugh: Dale 100_4651.jpg 100_4652.jpg 100_4653.jpg 100_4654.jpg

100_4594.jpg 100_4645.jpg 100_4596.jpg 100_4654.jpg
 

jhendery

Petty Officer 1st Class
Joined
Jun 14, 2012
Messages
336
Great work Dale! Your restoration of the Cherokee Playboy to original is very good work. Nicely done!
 

ssdale

Starmada Splash of the Year 2016
Joined
Nov 4, 2011
Messages
285
Thanks Jeff!,
Wish I could have gotten the original pics to load, but these should help someone identify their boat. It was a really fun project and I still enjoy the rig a couple times each summer. Spring is finally here!
 

gemrose

Recruit
Joined
Feb 13, 2019
Messages
3
[No message]
 

Attachments

  • photo308077.jpg
    photo308077.jpg
    236 KB · Views: 8
  • photo308078.jpg
    photo308078.jpg
    178.5 KB · Views: 9
  • photo308079.jpg
    photo308079.jpg
    106 KB · Views: 13
  • photo308080.jpg
    photo308080.jpg
    1.2 MB · Views: 7

gemrose

Recruit
Joined
Feb 13, 2019
Messages
3
I found this boat about 80 miles north east of McKenzie TN. Had a few leaky rivets, lol about 70 of them. Now waiting for the weather to warm up so we can get back to work on it.
 

Attachments

  • photo308082.jpg
    photo308082.jpg
    1.7 MB · Views: 8

achris

More fish than mountain goat
Joined
May 19, 2004
Messages
27,468
gemrose Please read the forum rules regarding posting to old threads, this thread is 4 years old, a little more than the 90 days we request. (forum rules link at the bottom of my signature.)

chris.
iboats mod team.
 
Status
Not open for further replies.
Top