check valves

spanke79

Cadet
Thread starter
Joined
Jul 11, 2016
Messages
19
yes I have a 1992 evinrude intruder 175 and theres 12 check valves on the intake manifold 6 per side some have plastic pieces covering the holes and some don't first are they all suppose to be the same and 2 whats the purpose of them
 

emdsapmgr

Supreme Mariner
Joined
Dec 9, 2005
Messages
11,551
These hose barbs on the intake manifold are part of the engine's "recirculation system." Helps reduce excel fuel buildup behind the reeds so the engine will idle longer/better.
 

emdsapmgr

Supreme Mariner
Joined
Dec 9, 2005
Messages
11,551
Considering the size of the tiny orfices of the recirc system, compared to the huge throats of each carb, they will have little real difference at WOT. Still, for max efficiency, it's best to have the recirc system working as designed. Any leak on part of the recirc system will slightly detract from WOT efficiency.
 

spanke79

Cadet
Thread starter
Joined
Jul 11, 2016
Messages
19
I appreciate the help this is my first go around tearing a boat motor apart
 
Top