carb kit gasket question

[guinness]

I have a rebuild kit for a 94 johnson 30hp 2 cyl. The carb kit is 396701. The old gaskets were so deteriorated that I can't tell if the high speed nozzle gasket is the notched one or the completely round one. The first would leave openings into the body of the nozzle and the second blocks the opening completely. Anyone know whish is the correct one?
Thanks!

 

[tashasdaddy]

Re: carb kit gasket question

go here you can see diagram. http://shop2.evinrude.com/ext/index.aspx?s1=bf6ad09c53cead335fcfd8a6471c0f7f

 

[guinness]

Re: carb kit gasket question

Thanks, but for the life of me I can't tell from the drawing if that gasket has interior circumference notches or does not. So, I guess the question is: does proper operation of the carburetor require fuel entry into the housing of the nozzle body or does it require a gasket that keeps fuel out of it? I would think all of these carbs work similarly, so anyone rebuild a carb lately that recalls if the nozzle gasket is notched or not?

Thanks again.

 

[tashasdaddy]

Re: carb kit gasket question

marked in red, goes on the pick up tube, seals the center of the carb.

 

[guinness]

Re: carb kit gasket question

You are a gentleman and a scholar! Thanks much.