Can anyone identify this jet drive?

MikkiJayne

Cadet
Thread starter
Joined
Aug 28, 2013
Messages
8
Hi all, newb to the forum, but already done a lot of reading on some amazing restos and learning loads :)

I've just bought a Dateline Striker II (indistinguishable from a Bikini from what I can see) which has a 2.0 Pinto attached to this jet drive:

jetdrive.jpg


I can't find any identifying marks on it anywhere, nor can I find anything similar on this or any other forum or Google :confused: Does anyone know what it is please?

This is the boat it's in:

lilith1.jpg


No idea what date it is - guessing early 80s maybe?

Thanks in advance :)
 

heyyou325

Chief Petty Officer
Joined
Feb 17, 2011
Messages
649
Re: Can anyone identify this jet drive?

Don't know anymore here than on Vintage jet boats. Not an eliminator drive, nor a bueler turbocraft. A lot of off the wall brands. My eliminator is actually a good drive. Check on the inspection cover or on the pump just behind the engine. My berkeley has a tag right behind the engine too.
 

heyyou325

Chief Petty Officer
Joined
Feb 17, 2011
Messages
649
Re: Can anyone identify this jet drive?

Forgot to say, good luck finding out about it. It's taken me over 2 1/2 years at both sites and while I'm finding out more, still would like to learn more. Let us know what you find out.
 

MikkiJayne

Cadet
Thread starter
Joined
Aug 28, 2013
Messages
8
Re: Can anyone identify this jet drive?

Thanks for the reply :) Turns out its a West End Marine unit which is the predecessor to the more well-known PP65. Slight cosmetic differences, but it takes the same impeller which is good news. I actually found out from a prop repair specialist in the end! West End Marine are only 10 miles from my office so I will go and see them next week :happy:

(the drive also dates the boat to the early 70s I think)
 

heyyou325

Chief Petty Officer
Joined
Feb 17, 2011
Messages
649
Re: Can anyone identify this jet drive?

Congrats, at least they are still in business. There's a lot of good things about older drives. If you have a supplier pf parts (mine has to be made at a machine shop), and a repair manual, or at least someone who knows something about them. In 2 1/2 years, I've found 7 people who have drives like mine (eliminator) and most are real happy with them. Good luck with it, and let us know how things turn out.
 
Top