Cable Drum steering Reversed

Adf

Cadet
Thread starter
Joined
Apr 14, 2012
Messages
6
Hi everyone,

I have the old cable drum style steering on my boat which I am restoring, but it appears to be reversed, i.e when I turn the wheel left, the boat would turn right. Does anyone know how I could fix this?

Thanks.
 

GA_Boater

Honorary Moderator Emeritus
Joined
May 24, 2011
Messages
49,038
Re: Cable Drum steering Reversed

On the drum reverse the cable. In other words - If the cable comes off the bottom of the drum to the pulleys, restring so the cable comes off the top. That should do it.
 

southkogs

Moderator
Staff member
Joined
Jul 7, 2010
Messages
15,134
Re: Cable Drum steering Reversed

... what drive/engine/motor?

Only reason I ask is that I have an old stern drive that uses a steering tube that passes through the transom and meets the BACK of the outdrive (most meet the front). I have to mount my steering set inverted to get it to work right.
 

Adf

Cadet
Thread starter
Joined
Apr 14, 2012
Messages
6
Re: Cable Drum steering Reversed

Its an old Mariner outboard, but the steering cables attach to a bar thing (picture below)

103_1080.jpg
 

JimS123

Fleet Admiral
Joined
Jul 27, 2007
Messages
8,382
Re: Cable Drum steering Reversed

... what drive/engine/motor?

Doesn't matter - they all work the same.

When you say "cable...drum" that automatically signifies a vintage OB

And, yes....the cables need to come off the top of the drum.
 

littlerayray

Lieutenant
Joined
Feb 17, 2013
Messages
1,456
Re: Cable Drum steering Reversed

that bar thing is a turn buckle used to increase or decrease tension not sure if it is best thing to be using in a steering setup jmho
 

smokeonthewater

Fleet Admiral
Joined
Dec 3, 2009
Messages
9,838
Re: Cable Drum steering Reversed

Just on the off chance that you are looking at this wrong.... when you turn the wheel left, the front of the motor needs to turn right
 
Top