Bunk rollers

[GBJMACK]

 

[GBJMACK]

Has anyone ever replaced their bunks with these bunk rollers from Amazon?

 

[alldodge]

Welcome
I'm sure they will work "IF" they can handle the weight and can be placed correctly to support the hull

What boat/trailer would they be used on? Have pics?

 

[GBJMACK]

 

[GBJMACK]

I have a199

Welcome
I'm sure they will work "IF" they can handle the weight and can be placed correctly to support

 

[GBJMACK]

I have a1992 Tracker V-Deep 16 with a 50hp Honda motor.

 

[alldodge]

If they are about the same length as the original then I don't see a problem

 

[airshot]

I prefer to use the wobble roller units as they fit/ support the hull better. On aluminum boats you can't have to many rollers. To few and it will dent the hull.

 

[JimS123]

I replaced the OEM bunks with this very setup a week after I bought my brand new Starcraft / Load Rite setup. Worked perfect.

Add up the boat, engine and stuff total weight and then divide by the number of rollers. If you have less than 100# per roller you will be fine no matter what type of hull.

 

[GBJMACK]

I replaced the OEM bunks with this very setup a week after I bought my brand new Starcraft / Load Rite setup. Worked perfect.

Add up the boat, engine and stuff total weight and then divide by the number of rollers. If you have less than 100# per roller you will be fine no matter what type of hull.

That's awesome. I need something simple to replace the bunks as I launch my boat in some shallow places. Thanks

 

[JimS123]