bow mount trolling motor with bow rails

waltersauto

Recruit
Thread starter
Joined
Sep 10, 2009
Messages
3
I have read about similar posts concerning bow mounted motors,, I am trying to figure out how to mount trolling motor on my center console with rails approx 18 high. Having trouble with rail getting the way of motor. Would it be ok to cut a small section of the rail away to let motor clear. Worried about the strength of the rail once I make a cut. Appreciate any help.
 

relstabw

Seaman
Joined
Apr 17, 2009
Messages
63
Re: bow mount trolling motor with bow rails

I have read about similar posts concerning bow mounted motors,, I am trying to figure out how to mount trolling motor on my center console with rails approx 18 high. Having trouble with rail getting the way of motor. Would it be ok to cut a small section of the rail away to let motor clear. Worried about the strength of the rail once I make a cut. Appreciate any help.

This is the way I mounted my Motorguide W-45 trolling motor on my bowrider. You should be able to purchase rail end mounts so if you cut the rails the ends are supported. I added the deck plug since I had to cut a hole for access to put backing under the mount. Hope this helps.
 

Attachments

  • ATT1129432.jpg
    ATT1129432.jpg
    46.8 KB · Views: 1
  • ATT1129430.jpg
    ATT1129430.jpg
    64.3 KB · Views: 1
Top