Bow mount trolling motor question

bdentel1

Recruit
Thread starter
Joined
Mar 22, 2011
Messages
2
Hi guys, this is my first post. I recently acquired an aluminum boat that i am in the process of restoring. So far all i have done is cleaned it up, built a casting deck and restored the transom. I have a minn kota powerdrive v2 that is supposed to be bow mounted. since the boat is so light and I cannot afford a 9.9 right now, I was wondering if there was any way to mount the trolling motor on the transom. Thanks in advance for all the help.
 

Silvertip

Honorary Supreme Mariner
Joined
Sep 22, 2003
Messages
28,772
Re: Bow mount trolling motor question

Why would you do that? Trollers are far more effective on the bow than the stern, especially in windy weather. The V2 can be controlled from anywhere in the boat. So why the need to mount it on the transom?
 

bdentel1

Recruit
Thread starter
Joined
Mar 22, 2011
Messages
2
Re: Bow mount trolling motor question

Silvertip, thanks for responding. Well the motor was given to me but was off of a much bigger boat. I believe the shaft is 54". This means, after I build a motor mount for the bow, the head of the motor would need to be sticking very high in the air. I do not need to move very far/fast in the lakes I will be using the boat on so I just thought it would be easier/ more out of the way if it could be mounted on the transom. Do you suggest I just build a mount and mount it on the transom instead?
 
Top