Boats from work.

MikeSchinlaub

Lieutenant Junior Grade
Thread starter
Joined
Jan 14, 2025
Messages
1,023
I got in a rush and didn't take pics, but the blue Nitro is done.

20261112_155109.jpg
Hamby stand.

20261113_105850.jpg
The port side ratchet rope was pulled out almost all the way to the nose, and the pocket for the cover ratchet was ripped open, so I just had to zip tie it so it wasn't loose and flopping around. Also no poles, port side center cover strap was broke and had to be tied to the frame, and star side was just gone.

Next is a red Nitro. These are the only pics I have right now, but I ground it yesterday and glassed today. Beave (supervisor) said the hull was all stressed out too. I'll have to look for that Monday.

20261113_133916.jpg

20261113_133924.jpg

20261113_133931.jpg
 

MikeSchinlaub

Lieutenant Junior Grade
Thread starter
Joined
Jan 14, 2025
Messages
1,023
is the black in the last photo primer ?
No, black gel. You always spray black under flake, it helps you see that your flake has covered well, and prevents a weird look you can get from spraying flake over clear. Usually, you just need a coat of really thinned down black right before yoy spray the flake, but I like doing bigger jobs like this because I can fine tune the bodywork with it.
 
Top