boat purchase

tdeere

Recruit
Thread starter
Joined
Jan 24, 2016
Messages
5
I am new to outboards I have a chance to buy a 2000 javelin renegade with a johnson 175 the man always took care of boat and ran the good johnson oil will I be OK or not thanks
 

GA_Boater

Honorary Moderator Emeritus
Joined
May 24, 2011
Messages
49,038
Welcome aboard.

I take it you are taking the word of the seller. Sometimes that works, but not often.

Can you take the boat on a test drive?
 

batman99

Petty Officer 1st Class
Joined
Sep 13, 2012
Messages
393
Just like buying a used vehicle, best to get a boat mechanic to inspect it. And, take for a test drive as well. Yes. The seller may be a nice guy but there could be things wrong with it - that he doesn't know about. And remember... Would you buy a used vehicle without taking it for a test drive?
 

jbcurt00

Moderator
Staff member
Joined
Oct 25, 2011
Messages
25,353
Got to see pix and know what he's asking....

It is a 15yr old boat

What year motor?
 

fhhuber

Lieutenant
Joined
Jun 19, 2014
Messages
1,365
Common issues that the seller may not even be aware of are ROT, Rot and more rot...

But:

"The switch to composite construction allowed Javelin to eliminate all wood from the boat's design while still providing a sturdy, reliable hull. "

NO WOOD TO ROT!

there's a lot of issues avoided from the start...
 

tommarvin

Ensign
Joined
Nov 22, 2015
Messages
999
I would do a leak down test, Hf has them for 40 bucks, YouTube explains how to use it perfectly, to check the rings, if one piston is a lot lower don't buy it. Open the drain plug on the lower unit, may have to open fill plug to get a little to drain out, any water come out if so don't buy it. Sea trials testing is just as/maybe more important as the leak down test, but for some reason not many people do them, including myself.

If you buy the boat, check back so we can help you more, maintance etc.
 

emdsapmgr

Supreme Mariner
Joined
Dec 9, 2005
Messages
11,551
Good cylinder compression is everything to a 2-stroke engine. Check it first, make sure they are all within 10% of each other.
 

tdeere

Recruit
Thread starter
Joined
Jan 24, 2016
Messages
5
he has been a friend a long time he just cant use anymore I have read horror stories about ficht motors this is a carb engine my main concern is are they reliable motors the boat is beautiful the test drive is not a problem. I owned a 2003 25 hp. Johnson it was great I always ran the good oil and used stabil during winter the boat in question sit in the garage he pulls it out and connects the muffs and runs it and then fogs it and keeps charger on it any issues was handled by a dealer I was going to take to a dealer to check before purchase on dealer said he would remove oil tank because the diaphragm can get a hole in it and damage engine due to lack of oil would like to take out this weekend I am looking for a reliable boat to share time with grand kids and some relaxing fishing for myself any input would be appreciated greatly I know mercury is well known but are these 175 Johnson's good reliable motors
 

emdsapmgr

Supreme Mariner
Joined
Dec 9, 2005
Messages
11,551
These 60-degree V6 carb engines are great. They are quiet, relatively lightweight, make a lot of torque and are reliable. Esp those carb engines. I wouldn't flinch to purchase one. Just make sure the compression is ok, and check the lower unit oil for water intrusion.
 

David Young

Chief Petty Officer
Joined
Jul 12, 2015
Messages
485
Like others have said, "check the compression of each cylinder". If good, should be a nice boat to own.
 

tdeere

Recruit
Thread starter
Joined
Jan 24, 2016
Messages
5
Lower unit is good he changed yearly and no issues will have boat checked out would it be good to remove vro or leave it there are they problematic?
 

tommarvin

Ensign
Joined
Nov 22, 2015
Messages
999
That dealer gave you great advice,on removing the oil tank, all risk and no reward, I have read quit a few post about the oil stops going in the gas, the filters plug up to. Diaphragm pumps aren't very good in the first place. premix 50:1 then pour in gas tank.

Free factory outboard service manuals at www boatinfo.no/lib/library.html
 

fhhuber

Lieutenant
Joined
Jun 19, 2014
Messages
1,365
My local boat repair place says to disable the VRO and go pre-mix as fast as you can..

The way I got my current hull was the guy's VRO failed so he sold the boat cheap.
I've seen a few guys with blown up 1990's Johnsons due to VRO failures.

I have the dual pump modification (I think its the fuel pumps for appx 1977 Johnson 150) on my 1989 150 GT (1989 mfg date, 1990 first title so the state calls it a 1990) and use pre-mix.
 

tdeere

Recruit
Thread starter
Joined
Jan 24, 2016
Messages
5
I am going to do a compression test .does anyone know what is good for this motor if it's good I'm going to test drive I assume I need to pull plug wires off and open throttle and remove a plug and test one at a time thanks for the help everyone
 

oldboat1

Fleet Admiral
Joined
Apr 3, 2002
Messages
9,612
Buying or selling among friends has some risk IMO -- think it's a good idea to do the dealer check and service, particularly VRO or other issues you are concerned about. Then it's between you and the shop (good for the friendship and the motor).
 

tdeere

Recruit
Thread starter
Joined
Jan 24, 2016
Messages
5
Model # RJ175PLSSC this is not the ficht model correct I believe it's carbs any thoughts thanks
 
Top