Blasted weather

[JasonB]

I was laying glass and resin on my new stringers Saturday in 70+ degree weather. They are calling for 1"-3" of slow in the next county over tonight. There goes getting the stringers done tomorrow...

 

[NathanY]

Re: Blasted weather

The curing of resin is a chemical reaction that will take place in water. My point being that the cold will not hurt the process, if you could do it under a tarp of something you would probably be able to finish it. I dont know, just trying to make you feel better. It is 70 here.

 

[JasonJ]

Re: Blasted weather

I feel your pain, I was able to start glassing the transom in the other day due to the 70s the temp was at. Now, its a little cooler, but I have been working too late in the day, and I have been getting home at 7:00ish. Maybe today I'll get home earlier, but I am not counting on anything until the weekend....

 

[JasonB]

Re: Blasted weather

The weather report ius calling for 70+ degrees Saturday.... Tennessee, don't like the weather? Wait an hour or two and it will change <br /><br />I have the boat under a canopy so I can work on it, but with 30 degree temps, I'm finding other things to do like the switch panel or other things I can take indoors. My fingers don't work well after about 5 minutes outside right now. Found that out at 11pm last night when I ran out to dump some antifreece in the risers of my other boat in case teh temps fell below freezing...

 

[JasonJ]

Re: Blasted weather

Yup, thats the way it is up here in beautiful Northern Idaho. Cold warm cold warm. Its supposed to be in the 60s this weekend, good enough for some more glassin'....