Yacht Dr.
Vice Admiral
- Joined
- Feb 26, 2005
- Messages
- 5,581
Hi all ..
Here is a 700k Shannon that had some " problems " ( It is a new boat )
http://s699.photobucket.com/albums/vv352/YachtDr/Shannon/
What you see is done with 545 epoxy primer and topcoat with AwlCraft 2000..
The repairs are done with west system epoxy, 1.5 oz mat and 1708 with peely ply over it.
The heat lamps are not for the cure.. it is for the " post cure ". basically after the repairs are made in epoxy we do not want that repair to shrink after primer and paint is applied and baked out in the sun with a black hull.
Enjoy.
YD.
Here is a 700k Shannon that had some " problems " ( It is a new boat )
http://s699.photobucket.com/albums/vv352/YachtDr/Shannon/
What you see is done with 545 epoxy primer and topcoat with AwlCraft 2000..
The repairs are done with west system epoxy, 1.5 oz mat and 1708 with peely ply over it.
The heat lamps are not for the cure.. it is for the " post cure ". basically after the repairs are made in epoxy we do not want that repair to shrink after primer and paint is applied and baked out in the sun with a black hull.
Enjoy.
YD.