Battery Charger Incorrect connection.

marknema

Recruit
Thread starter
Joined
Nov 1, 2009
Messages
2
I am attempting to charge my battery for my 1994 40 HP Mercury with a durcell charger, Battery and charger are both 1 year old. Battery charger indicates incorrect connecting when I put red on plus on the battery, but when revered (red on -) the indiactor says ok, but battery charger will not cycle. Just stay on..Any ideas what could cause this?
 

BeaufortTJustice

Petty Officer 1st Class
Joined
Oct 8, 2009
Messages
248
Re: Battery Charger Incorrect connection.

Do you have another battery or charger to try in order to narrow down whether it is the charger or battery? I'd start there. Good luck and let us know what you find.
 

Silvertip

Honorary Supreme Mariner
Joined
Sep 22, 2003
Messages
28,772
Re: Battery Charger Incorrect connection.

I would first verify that the battery cables for the boat are properly connected. If you don't know how to verify this, the NEG terminal of the battery connects to the engine block. The POS terminal of the battery connects to the starter solenoid. You cannot believe how many people make this mistake. Then verify that you are actually connecting the POS lead from the charger to the POS terminal of the battery. Just because the charger clip has a red marking does not make it right. Stuff gets screwed up in manufacturing all the time (the Friday syndrome). Lastly, remove the battery from the boat and try the charger. If it still doesn't work properly the charger is very suspect.
 
Top