Bail-o-matic on McCULLOCH

Fatherbohab

Cadet
Joined
Mar 20, 2021
Messages
19
Hey kids I just restored a 1957 Hult craft wood boat. It has a 45hp McCULLOCH outboard with a hose coming out just below engine housing with a Scott Bail-a-matic attached to the end. It was just sitting in the engine well. Any clue on what is is/does.
 

Attachments

  • 0F724FB1-A758-4E9A-94D3-7260CA9D3693.jpeg
    0F724FB1-A758-4E9A-94D3-7260CA9D3693.jpeg
    1.6 MB · Views: 14
  • 965C9444-D5DE-4F89-9880-F0A00E9F6CFF.jpeg
    965C9444-D5DE-4F89-9880-F0A00E9F6CFF.jpeg
    1.6 MB · Views: 13
  • 305BCD50-C983-4E34-87A9-33036F1928E6.jpeg
    305BCD50-C983-4E34-87A9-33036F1928E6.jpeg
    1.9 MB · Views: 13
  • F172D592-1445-4C4E-9FF8-0BEE6F54C843.jpeg
    F172D592-1445-4C4E-9FF8-0BEE6F54C843.jpeg
    3 MB · Views: 12
  • DA7CC939-B675-40D8-863E-05797CCAC9CE.jpeg
    DA7CC939-B675-40D8-863E-05797CCAC9CE.jpeg
    2.1 MB · Views: 13
  • image.jpg
    image.jpg
    2.7 MB · Views: 14
  • image.jpg
    image.jpg
    3.8 MB · Views: 14

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
39,930
This is from an era where many boats were made of wood.-----This feature would pump out / bail out the boat whenever the motor was running.----
 

Fatherbohab

Cadet
Joined
Mar 20, 2021
Messages
19
This is from an era where many boats were made of wood.-----This feature would pump out / bail out the boat whenever the motor was running.----
So I imagine it uses vacuum from the motor to pump. I figured that was the deal but it’s not long enough to actually go in the bilge.
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
39,930
It does not use vacuum.-----Most of them used 2 impellers !!----One to provide cooling water to engine.----One to pump out leaky cedar strip boats.----Remember the 50's and 60's were a simpler time.
 
Top