Auto bilge pump

Texasace

Recruit
Thread starter
Joined
Aug 11, 2012
Messages
2
Just bought a brand new 2011 Tahoe 228. Took it out for the first time today.
The bilge pump switch on the dash board has Bilge and Auto Bilge. No way to manually turn it off.
Got out of the water and realize my auto bilge is stuck on.
Got home, unhooked the battery and it stopped. Connected the loop back and you can still hear the bilge pumping.

First question, where is my bilge pump?
Second, how can I fix this?

Any help is appreciated. This is our first boat so we're newbies and basic info is greatly accepted.
Thanks!
 

Nickypoo

Petty Officer 1st Class
Joined
Mar 21, 2012
Messages
287
Re: Auto bilge pump

Normally bilge pumps are under the engine. You can trace the hose coming off your thru-hull fitting (Where the pump shoots water out the side of your boat) and find exactly where it is.

For a temporary fix you could try tapping the side of the pump with a screwdriver or something to free the float if the pump has an integral float switch. If the float switch is external then you need to locate it and determine why it's stuck. An external float switch will be connected to the pump with wiring.

If the problem persists you may need a new bilge pump or float switch if it's external.
 

Texasace

Recruit
Thread starter
Joined
Aug 11, 2012
Messages
2
Re: Auto bilge pump

Thanks! Fixed it. Has an external float that was stuck. I appreciate your help!
 
Top