anode won't come off

donke

Recruit
Thread starter
Joined
Dec 24, 2013
Messages
4
I have a 1988 evenrude 100 on a proline. I am trying to get off the anode on the lower motor mount bolts but they won't budge. My question is are the anodes threaded and come off counter clockwise or something else. I'm afraid to apply too much torque and bust the bolt. attched is a picture of the problem child.
thanks
 

Attachments

  • 20131224_125904_resized.jpg
    20131224_125904_resized.jpg
    127.7 KB · Views: 0

pn

Petty Officer 1st Class
Joined
Apr 20, 2013
Messages
374
Re: anode won't come off

is there a reason why your taking the annode off? It looks like there is alot of meat there to do the job that it is there for, just leave it. If your changing the motor out and you bust the bolt then change the bolt out when you put the new motor on. Threaded, heat, pipe wrench ccw.
 

donke

Recruit
Thread starter
Joined
Dec 24, 2013
Messages
4
Re: anode won't come off

I'm installing a power pole via an adapter between the motor mount and transom. I eventually got them off with a butane torch, hammer, wd40, and pipe vise grips. They are threaded and I can reuse. thanks for the replies.
 
Top