Would it be temp, or the drive level lube, this was the first start up from last year. Thank you for your response!It’s supposed to do that Before the motor starts to tell you it’s working. If it does it after it’s running you have an issue.
2 strokeUsually hi temp or low on 2 stroke oil. Is your outboard a 2 or 4 stroke? Did the alarm shut off when the motor stared?
Yes after it was started too.Well did you have it running? If it did it after started but not warmed up, I'd say the drive lube, or oil pressure. The drive lube monitor float will stick sometimes as the bottle should be cleaned out on occasion.
It stayed on2 stroke
If the boat has two oil tanks confirm both are full and the floats/sender moves freely. Most likely not a temp issue if it alarms as soon as you
If the boat has two oil tanks confirm both are full and the floats/sender moves freely. Most likely not a temp issue if it alarms as soon as you start the motor.